COFFEENATICS TIJLI IS NOW OPEN (08:00 - 22:00)

PUQpress: How do I adjust my PUQpress Tamping Profiles?

PUQpress how to select tamping profile

PUQpress: How do I adjust my PUQpress Tamping Profiles?

GEN-5 comes with improved tamping profiles to consitently improve the control over your flow rate.

There are 5 different tamping profiles, all explained below.
Q2 has all five of them. Mini and Q1 have P0, P1 and P4

Hold the clean button 3 seconds. You can scroll up and down with + and –

P0: SPEEDY
Designed to speed up the work flow – 1.3 seconds – 1st tamp with force, 2nd tamp to polish. The original PUQpress Tamp

P1: PRECISION
Designed to optimize extraction with a big diameter tamper and competition baskets. PRECISION prevents suction between the tamper and the filter basket, by moving the tamper slowly in the upwards direction –  2.1 seconds – 1st tamp with force, 2nd tamp to polish

P2: SOFT
Designed for an extra soft tamp. Has a range of 5kg to 15kg  – 2.5 seconds – 1st tamp with force, 2nd tamp to polish

P3: HULK
Designed to achieve a longer extraction time while using the same dose & grind coarsness. For short shots that are used in Flat Whites for example. – 2.5 seconds – 1st tamp with force, 2nd tamp with force, 3rd tamp to polish

P4: SINGLE
Don’t use this setting. It is here to show you why PUQpress tamps twice in case you are curious

Have more questions on your PUQpress, contact our PUQpress Specialist, click here!

Leave a comment

Please note, comments must be approved before they are published